Display Interface Vlan-Interface - H3C s3600 series Command Manual

display interface Vlan-interface

Syntax
display interface Vlan-interface [ vlan-id ]
View
Any view
Parameters
vlan-id: Specifies a VLAN interface number.
Description
Use the display interface Vlan-interface command to display information about the specified VLAN
interface or all VLAN interfaces already created if no VLAN interface is specified.
The output of this command shows the state, IP address, description and other information of a VLAN
interface. You can use the information to troubleshoot network problems.
Related commands: interface Vlan-interface.
Examples
# Display information about all existing VLAN interfaces.
<Sysname> display interface Vlan-interface
Vlan-interface1 current state :UP
Line protocol current state :UP
IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 00e0-fc14-000b
Internet Address is 192.168.0.31/24 Primary
Description : Vlan-interface1 Interface
The Maximum Transmit Unit is 1500
Vlan-interface20 current state :DOWN
Line protocol current state :DOWN
IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 00e0-fc14-000b
Internet Address is 1.1.1.1/24 Primary
Internet Address is 1.1.2.1/24 Sub
Description : Vlan-interface20 Interface
The Maximum Transmit Unit is 1500
# Display information about VLAN-interface 2.
<Sysname> display interface Vlan-interface 2
Vlan-interface2 current state : DOWN
Line protocol current state : DOWN
IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 000f-e207-4101
Internet Address is 10.1.1.1/24 Primary
Description : Vlan-interface2 Interface
The Maximum Transmit Unit is 1500
1-2