Icmp Redirect Send - H3C s3600 series Command Manual

total broadcast or multicast packets : 25006
no socket broadcast or multicast packets: 24989
not delivered, input socket full: 0
input packets missing pcb cache: 1314
Sent packets:
Total: 7187
Table 2-7 Description on the fields of the display udp statistics command
Total
checksum error
shorter than header
data length larger than
packet
no socket on port
Received
total broadcast or multicast
packets:
packets
no socket broadcast or
multicast packets
not delivered, input socket
full
input packets missing pcb
cache
Sent
Total
packets:

icmp redirect send

Syntax
icmp redirect send
undo icmp redirect send
View
System view
Parameters
None
Description
Use the icmp redirect send command to enable the device to send ICMP redirection packets.
Use the undo icmp redirect send command to disable the device from sending ICMP redirection
packets.
By default, the device is enabled to send ICMP redirection packets.
Field Description
Total number of received UDP packets
Total number of packets with incorrect checksum
Number of packets with data shorter than header
Number of packets with data longer than packet
Number of unicast packets with no socket on port
Total number of received broadcast or multicast
packets
Total number of broadcast or multicast packets without
socket on port
Number of not delivered packets due to a full socket
cache
Number of packets without matching PCB cache
Total number of UDP packets sent
2-14