H3C s3600 series Command Manual page 812

Field
Left Port : Index = 255,
IsEdge = 0
Right Port : Index = 25,
IsEdge = 0
Units Num Left : 1
Units Num Right : 2
Units Num Backup: 2
# Display the topology database information of the current fabric.
<Sysname> display ftm topology-database
Total number of units in fabric : 8, My Unit ID : 4
UID CPU-Mac Priority Fabric-Port Board-ID A/M
1 000f-e20f-5002 10
2 000f-e20f-5132 10
3 000f-e20f-5252 10
*4 000f-cbb7-3264 5
5 000f-cbb7-2142 10
6 000f-e20f-8922 10
7 000f-cbb7-2260 10
8 000f-cbb7-2734 10
Table 1-2 display ftm topology-database command output description
Field
UID
Priority
Fabric-Port
A/M
Indexes of the left and right ports:
IsEdge: Whether the device is at either end of a bus topology IRF
fabric in which the number of member devices has reached the
upper limit.
0: No
1: Yes
Number of units (both directly-connected and subtending units)
connected to the port, including the device itself.
1: The left port has no connected unit
2: The right port connects to one unit
Total number of units in a fabric
Left/Right 1
Left/Right 1
Left/Right 1
Left/Right 1
Left/Right 1
Left/Right 1
Left/Right 1
Left/Right 1
Unit ID
Priority value:
10 means the switch adopts automatic numbering
5 means the switch adopts manual numbering
Manual numbering has a higher priority than automatic numbering.
Fabric port
In a ring topology structure, the left and right ports of all units are
connected, and are displayed as Left/Right.
In a bus topology structure, the units at both ends of the bus have
only one fabric port connected, displayed as Left/ or /Right.
Indicates that the switch adopts automatic numbering or manual
numbering:
A for automatic
M for manual
1-6
Description
A
A
A
M
A
A
A
A
Description