H3C s3600 series Command Manual page 549

Retry sending times of noresponse acct-stop-PKT =500
Quiet-interval(min)
Username format
Data flow unit
Packet unit
calling_station_id format
unit 1 :
Primary Auth State=active,
Primary Acc State=active,
------------------------------------------------------------------
Total 1 RADIUS scheme(s). 1 listed
Table 1-5 Description on the fields of the display radius scheme command
Field
SchemeName
Index
Type
Primary Auth IP/Port
Primary Acct IP/Port
Second Auth IP/Port
Second Acct IP/Port
Auth Server Encryption Key
Acct Server Encryption Key
Accounting method
Accounting-On packet enable, send times = 15 ,
interval = 3s
TimeOutValue(in second)
RetryTimes
RealtimeACCT(in minute)
Permitted send realtime PKT failed counts
Retry sending times of noresponse
acct-stop-PKT
Quiet-interval(min)
Username format
Data flow unit
=5
=without-domain
=Byte
=1
Second Auth State=block
Second Acc State=block
Name of the RADIUS scheme
Index number of the RADIUS scheme
Type of the RADIUS servers
IP address/port number of the primary
authentication server
IP address/port number of the primary
accounting server
IP address/port number of the secondary
authentication server
IP address/port number of the secondary
accounting server
Shared key for the authentication servers
Shared key for the accounting servers
Accounting method
The switch sends up to 15 Accounting-On
messages at intervals of 3 seconds after
restarting.
RADIUS server response timeout time
Maximum number of transmission attempts of a
RADIUS request
Real-time accounting interval in minutes
maximum allowed number of continuous
real-time accounting failures
Maximum number of transmission attempts of
the buffered stop-accounting requests
Time that the switch must wait before it can
restore the status of a primary server to active
Username format
Data unit of data flow
1-32
=XXXX-XXXX-XXXX in lowercase
Description