Super Authentication-Mode; Super Password - H3C s3600 series Command Manual

super authentication-mode

Syntax
super authentication-mode { super-password | scheme }*
undo super authentication-mode
View
User interface view
Parameters
super-password: Adopts super password authentication for low-to-high user level switching.
scheme: Adopts Huawei terminal access controller access control system (HWTACACS)
authentication for low-to-high user level switching.
Description
Use the super authentication-mode command to specify the authentication mode used for low-to-high
user level switching.
Use the undo super authentication-mode command to restore the default.
By default, super password authentication is adopted for low-to-high user level switching.
Note that the two authentication modes are available at the same time to provide authentication
redundancy. When both the two authentication modes are specified, the order to perform the two types
of authentication is determined by the order in which they are specified, as described below.
If the super authentication-mode super-password scheme command is executed to specify the
authentication mode for user level switching, the super password authentication is preferred and
the HWTACACS authentication mode is the backup.
If the super authentication-mode scheme super-password command is executed to specify the
authentication mode for low-to-high user level switching, the HWTACACS authentication is
preferred and the super password authentication mode is the backup.
When both the super password authentication and the HWTACACS authentication are specified,
the device adopts the preferred authentication mode first. If the preferred authentication mode
cannot be implemented (for example, the super password is not configured or the HWTACACS
authentication server is unreachable), the backup authentication mode is adopted.
Examples
# Specify HWTACACS authentication as the preferred authentication mode when a VTY 0 user
switches from the current level to a higher level, with the super password authentication as the backup
authentication mode.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] user-interface vty 0
[Sysname-ui-vty0] super authentication-mode scheme super-password

super password

Syntax
super password [ level level ] { cipher | simple } password
1-5