H3C s3600 series Command Manual page 868

mac-address mac-address: Accepts adding the device with the specified MAC address to the standard
topology of the cluster.
member-id member-id: Accepts adding the device with the specified member ID to the standard
topology of the cluster.
administrator: Accepts adding the administrative device to the standard topology of the cluster.
Description
Use the topology accept command to accept the topology of the current cluster as the standard
topology, and save the standard topology to the Flash memory of the administrative device so that the
standard topology can be restored when errors occur to the topology.
You can only use this command on the cluster management device.
If the management device is a slave device in an IRF fabric, the standard topology information is
saved only to the Flash of the master device in the IRF fabric.
Related commands: display cluster base-topology, topology restore-from, topology save-to.
Examples
# Save the current cluster topology as the base topology and save it in the local flash.
<aaa_0.Sysname> system-view
Enter system view, return to user view with Ctrl+Z.
[aaa_0.Sysname] cluster
[aaa_0.Sysname-cluster] topology accept all save-to local-flash
# Accept the device with the MAC address 0010-0f66-3022 as a member of the base cluster topology.
<aaa_0.Sysname> system-view
Enter system view, return to user view with Ctrl+Z.
[aaa_0.Sysname] cluster
[aaa_0.Sysname-cluster] topology accept mac-address 0010-0f66-3022
topology restore-from
Syntax
topology restore-from local-flash
View
Cluster view
Parameters
local-flash: Restores the standard topology of the cluster from the local Flash memory.
1-45