Display Unit - H3C s3600 series Command Manual

PortName StormType LowerLimit UpperLimit
--------------------------------------------------------------------------
Eth1/0/1 broadcast 9
Eth1/0/1 multicast 9
Eth1/0/2 unicast
Table 1-7 Description on the fields of the display storm-constrain command
Field
Flow Statistic Interval
PortName
StormType
LowerLimit
UpperLimit
Ctr-mode
Status
Trap
Log
Swi-num

display unit

Syntax
display unit unit-id interface
View
Any view
Parameters
unit-id: Unit ID, in the range of 1 to 8.
Description
Use the display unit command to display information about the ports on a specified unit.
Examples
# Display information about the ports on unit 1.
<Sysname> display unit 1 interface
Aux1/0/0
99
99
9 99
Interval to collect traffic statistics.
Name of an Ethernet port
Traffic type, which can be unicast, multicast, and broadcast
Lower threshold of traffic received on the port
Upper threshold of traffic received on the port
Control action to be taken when the broadcast/multicast/unicast traffic
exceeds the upper threshold, which can be block or shutdown.
Current status of the port, which can be normal or control.
on: trap information is output when a type of traffic received on the port
exceeds the upper threshold or falls below the lower threshold.
off: trap information is not output when a type of traffic received on the
port exceeds the upper threshold or falls below the lower threshold.
on: log information is output when traffic received on the port exceeds the
upper threshold or falls below the lower threshold
off: log information is not output when traffic received on the port exceeds
the upper threshold or falls below the lower threshold
Number of port state switchover
1-14
Ctr-mode Status
shutdown normal on
shutdown control on
shutdown normal off
Description
Trap Log Swi-num
off 3
off 1
on 0