Dldp - H3C s3600 series Command Manual

Table 1-1 Description on the fields of the display dldp command
dldp interval
dldp work-mode
dldp authentication-mode
cipher
dldp unidirectional-shutdown
dldp delaydown-timer
The port number of unit 1 with DLDP
interface GigabitEthernet1/1/1
dldp port state
dldp link state
The neighbor number of the port
neighbor mac address
neighbor port index
neighbor state
neighbor aged time

dldp

Syntax
dldp { enable | disable }
View
System view, Ethernet port view
Parameters
None
Description
In system view,
Use the dldp enable command to enable DLDP for all the optical ports.
Use the dldp disable command to disable DLDP for all the optical ports.
In Ethernet port view,
Use the dldp enable command to enable DLDP for the current port.
Use the dldp disable command to disable DLDP for the current port.
This command applies to non-optical ports as well as optical ports.
By default, DLDP is disabled.
Field Description
Interval for sending DLDP advertisement packets
DLDP work mode
DLDP authentication mode
DLDP authentication password
DLDP action to be performed on detecting a unidirectional
link
Setting of the DelayDown timer
Number of the DLDP-enabled ports on unit 1
Port type and port number
DLDP state of a port
DLDP link state
Number of the neighbor ports
MAC address of a neighbor port
Neighbor port index
Neighbor state, which can be two way or unknown.
Neighbor aging time
1-2