Snmp-Agent; Snmp-Agent Calculate-Password - H3C s3600 series Command Manual

snmp-agent

Syntax
snmp-agent
undo snmp-agent
View
System view
Parameters
None
Description
Use the snmp-agent command to enable the SNMP agent.
Use the undo snmp-agent command to disable the SNMP agent.
Execution of the snmp-agent command or any of the commands used to configure the SNMP agent,
you can start the SNMP agent.
By default, the SNMP agent is disabled.
Examples
# Start the SNMP agent.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] snmp-agent
An S3600 Ethernet switch provides the following functions to prevent attacks through unused UDP
ports.
Starting the SNMP agent opens UDP port used by SNMP agents and the UDP port used by SNMP
trap respectively.
Shutting down the SNMP agent closes UDP ports used by SNMP agents and SNMP trap as well.

snmp-agent calculate-password

Syntax
snmp-agent calculate-password plain-password mode { md5 | sha } { local-engineid |
specified-engineid engineid }
View
System view
1-12