Display Stop-Accounting-Buffer - H3C s3600 series Command Manual

Related commands: hwtacacs scheme.
Examples
# Display configuration information of HWTACACS scheme ht1.
<Sysname> display hwtacacs ht1
--------------------------------------------------------------------
template name
Primary-authentication-server
Primary-authorization-server
Primary-accounting-server
Secondary-authentication-server : 0.0.0.0:0
Secondary-authorization-server
Secondary-accounting-server
Current-authentication-server
Current-authorization-server
Current-accounting-server
Source-IP-address
key authentication
key authorization
key accounting
Quiet-interval(min)
Response-timeout-Interval(sec)
Realtime-accouting-Interval(min): 12
Stop-acct-PKT resending times
Domain-included
Traffic-unit
Packet traffic-unit

display stop-accounting-buffer

Syntax
display stop-accounting-buffer hwtacacs-scheme hwtacacs-scheme-name
View
Any view
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Displays the buffered stop-accounting requests of a
specified HWTACACS scheme. Here, hwtacacs-scheme-name is a string of up to 32 characters.
Description
Use the display stop-accounting-buffer command to display stop-accounting requests buffered in the
switch.
Related commands: reset
stop-accounting.
: ht1
: 172.31.1.11:49
: 172.31.1.11:49
: 172.31.1.11:49
: 0.0.0.0:0
: 0.0.0.0:0
: 172.31.1.11:49
: 172.31.1.11:49
: 172.31.1.11:49
: 0.0.0.0
: 790131
: 790131
: 790131
: 5
: 5
: 100
: No
: B
: one-packet
stop-accounting-buffer, stop-accounting-buffer
1-57
HWTACACS-server
enable, retry