Sysname - H3C s3600 series Command Manual

System View: return to User View with Ctrl+Z.
[Sysname] set unit 1 name hello
[Sysname] display irf-fabric
Fabric name is Sysname, system mode is L3.
Unit Name Unit ID
hello
Second

sysname

Syntax
sysname sysname
undo sysname
View
System view
Parameters
sysname: Name of the specified fabric, a string of 1 to 30 characters.
Description
Use the sysname command to set the name for the fabric where a device belongs. The modification will
affect the prompt character in the command line interface. For example, if the fabric name of the
Ethernet switch is H3C, the prompt character in user view is <H3C>.
Use the undo sysname command to restore the default fabric name.
Before a new device is added into a fabric, make sure that the fabric name of the device and the fabric
name of the devices in the fabric are consistent. You can enable the IRF automatic fabric function by
using the fabric member-auto-update software enable command to configure the device to
synchronize the fabric name automatically.
By default, the fabric name of an S3600 Series Ethernet switch is H3C.
Examples
# Change the fabric name of the device to hello.
<Sysname> display irf-fabric
Fabric name is Sysname, system mode is L3.
Unit Name Unit ID
First
Second
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] sysname hello
[hello] display irf-fabric
Fabric name is hello, system mode is L3.
Unit Name Unit ID
First
Second
1
2(*)
1
2(*)
1
2(*)
1-15