Ntdp Enable - H3C s3600 series Command Manual

H3C Comware Platform Software.
Comware Software, Version 3.10
Copyright(c) 2004-2007 Hangzhou H3C Tech. Co., Ltd. All rights reserved.
S3600-28P-EI S3600-EI-1545
Cluster : Candidate switch
Peer MAC
000f-e20f-1234
5600-0000-3334
Table 1-4 Description on the fields of display ntdp device-list verbose
Field
Hostname
MAC
Hop
Platform
IP
Version
Cluster
Peer MAC
Peer Port ID
Native Port ID
Speed
Duplex

ntdp enable

Syntax
ntdp enable
undo ntdp enable
View
System view, Ethernet port view
Parameters
None
Description
Use the ntdp enable command to enable NTDP globally or on a port.
Peer Port ID
Ethernet3/0/21
GigabitEthernet1/0/32
System name of a device collected by NTDP
MAC address of the collected device
Hops from this device to the collected device
Software platform of the collected device
IP address and mask length of the cluster management VLAN
interface on the collected device
Software version of the collected device
The role of the collected device for the cluster
MAC address of a neighbor device connected to the collected
device
Index of the port on the neighbor device connected to the
collected device
Index of the port on the collected device connected to the
neighbor device
Speed of the neighbor device port
Duplex mode of the neighbor device port
Native Port ID
Ethernet1/0/22
Ethernet1/0/4
Description
1-8
Speed Duplex
100 FULL
100 FULL