Display Fib Acl - H3C s3600 series Command Manual

Description
Use the display fib ip-address command to view the FIB entries matching the specified destination IP
address.
If no mask or mask length is specified, the FIB entry that matches the destination IP address and has
the longest mask will be displayed; if the mask is specified, the FIB entry that exactly matches the
specified destination IP address and mask will be displayed.
Examples
# Display FIB entry information which matches destination 12.158.10.0 and has a mask length no less
than eight.
<Sysname> display fib 12.158.10.0 longer
Route Entry Count: 1
Flag:
U:Usable G:Gateway
R:Reject E:Equal cost multi-path
Destination/Mask
12.158.10.0/24
# Display FIB entry information which has a destination in the range of 12.158.10.0/24 to
12.158.10.6/24 and has a mask length of 24.
<Sysname> display fib 12.158.10.0 255.255.255.0 12.158.10.6 255.255.255.0
Route Entry Count: 1
Flag:
U:Usable G:Gateway
R:Reject E:Equal cost multi-path
Destination/Mask
12.158.10.0/24
For details about the displayed information, see

display fib acl

Syntax
display fib acl acl-number
View
Any view
Parameters
acl-number: Basic ACL number, in the range of 2000 to 2999.
Description
Use the display fib acl command to display the FIB entries matching a specific ACL. For ACL, refer to
the part discussing ACL in this manual.
Examples
# Configure and display ACL 2001.
H:Host B:Blackhole
L:Generated by ARP or ESIS
Nexthop Flag TimeStamp
12.158.10.1 U
H:Host B:Blackhole
L:Generated by ARP or ESIS
Nexthop Flag TimeStamp
12.158.10.1 U
D:Dynamic
Interface
t[85391] Vlan-interface10
D:Dynamic
Interface
t[85391] Vlan-interface10
Table 2-1.
2-3
S:Static
S:Static