Ip Route-Static Detect-Group - H3C s3600 series Command Manual

Description
Use the display detect-group command to display the configuration of the specified detected group or
all detected groups.
Examples
# Display the configuration of detected group 1.
<Sysname> display detect-group 1
detect-group 1 :
detect loop time(s) : 15
ping wait time(s) : 2
detect retry times : 2
detect ip option : and
group state : not detecting
register module num : 0
detect ip count : 1
detect-list ip address
1 202.13.1.55
Table 1-1 Description on the fields of the display detect-group command
Field
detect-group 1
detect loop time(s)
ping wait time(s)
detect retry times
detect ip option
group state
register module num
detect ip count
detect-list
ip address
next hop

ip route-static detect-group

Syntax
ip route-static ip-address { mask | mask-length } { interface-type interface-number | next-hop }
[ preference preference-value ] [ reject | blackhole ] detect-group group-number
undo ip route-static ip-address { mask | mask-length } [ interface-type interface-number | next-hop ]
[ preference preference-value ]
next hop
1.2.3.4
Detected group number 1
Detecting interval, in seconds.
Timeout time of a ping operation, in seconds.
Number of retries of an auto detect operation.
The logic relationship between the detected objects in the
detected group. It can be and or or.
Current state of the detected group
Number of registered modules (that is, the number of the modules
utilizing the detected group.)
Number of the IP addresses contained in a detected group
Sequence number of an IP address contained in a detected group
IP address to be detected
Next hop IP address
1-3
Description