Web-Authentication Timer Idle-Cut - H3C s3600 series Command Manual

designated: Sets the Web authentication access method on the port to designated.
Description
Use the web-authentication select command to enable Web authentication on the current port and set
the Web authentication access method on the port.
Use the undo web-authentication select command to disable Web authentication on the port.
There are two Web authentication access methods:
shared: In this mode, the port allows multiple Web authentication users to be online at the same
time.
designated: In this mode, the port allows only one Web authentication user to be online at a time.
This configuration takes effect only when Web authentication is enabled globally. If Web authentication
is not enabled globally, this configuration will only be saved.
You are not allowed to enable Web authentication on a port if:
The port is an access port, or,
The port belongs to an aggregation group.
Examples
# Enable Web authentication on Ethernet 1/0/1 and set the Web authentication access method to
shared.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Ethernet 1/0/1
[Sysname-Ethernet1/0/1] web-authentication select method shared

web-authentication timer idle-cut

Syntax
web-authentication timer idle-cut timer
undo web-authentication timer idle-cut
View
System view
Parameters
timer: Interval for checking whether an online user is idle. It ranges from 10 to 86400 seconds. Value 0
means the idle user checking function is disabled.
Description
Use the web-authentication timer idle-cut command to set the idle user checking interval for Web
authentication.
1-7