Display Dhcp Server Expired - H3C s3600 series Command Manual

View
Any view
Parameters
all: Specifies all IP addresses.
ip ip-address: Specifies one IP address.
Description
Use the display dhcp server conflict command to display the statistics of IP address conflicts on the
DHCP server.
Related commands: reset dhcp server conflict.
Examples
# Display the statistics of IP address conflicts.
<Sysname> display dhcp server conflict all
Address
192.168.0.1
--- total 1 entry ---
Table 1-1 Description on the fields of the display dhcp server conflict command
Address
Discover Time

display dhcp server expired

Syntax
display dhcp server expired { ip ip-address | pool [ pool-name ] | interface [ interface-type
interface-number ] | all }
View
Any view
Parameters
ip ip-address: Specifies an IP address.
pool [ pool-name ]: Specifies a global address pool. The pool-name argument, a string of 1 to 35
characters, is the name of an address pool. If you do not provide this argument, this command applies
to all global address pools.
interface [ interface-type interface-number ]: Specifies a VLAN interface. If you do not specify a VLAN
interface, this command applies to all VLAN interfaces.
all: Specifies all DHCP address pools.
Discover time
Apr 2 2000 00:25:46 AM
Field
1-24
Description
Conflicting IP address
Time when the conflict is detected