Dot1X - H3C s3600 series Command Manual

Total maximum 802.1x user resource
number
Total current used 802.1x resource
number
Ethernet1/0/1 is link-down
802.1X protocol is disabled
Proxy trap checker is disabled
Proxy logoff checker is disabled
Version-Check is disabled
The port is an authenticator
Authentication Mode is Auto
Port Control Type is Mac-based
ReAuthenticate is disabled
Max number of on-line users
...

dot1x

Syntax
dot1x [ interface interface-list ]
undo dot1x [ interface interface-list ]
View
System view, Ethernet port view
Field Description
The maximum number of 802.1x users that a switch can
accommodate
The number of online supplicant systems
Ethernet 1/0/1 port is down.
802.1x is disabled on the port
Whether or not to send Trap packets when detecting a
supplicant system in logging in through a proxy.
Disable means the switch does not send Trap
packets when it detects that a supplicant system logs
in through a proxy.
Enable means the switch sends Trap packets when it
detects that a supplicant system logs in through a
proxy.
Whether or not to disconnect a supplicant system when
detecting it in logging in through a proxy.
Disable means the switch does not disconnect a
supplicant system when it detects that the latter logs
in through a proxy.
Enable means the switch disconnects a supplicant
system when it detects that the latter logs in through
a proxy.
Whether or not the client version checking function is
enabled:
Disable means the switch does not checks client
version.
Enable means the switch checks client version.
The port acts as an authenticator system.
The port access control mode is Auto.
The access control method of the port is MAC-based.
That is, supplicant systems are authenticated based on
their MAC addresses.
802.1x re-authentication is disabled on the port.
The maximum number of online users that the port can
accommodate
Information omitted here
1-4