H3C s3600 series Command Manual page 867

H3C Comware Platform Software.
Comware Software, Version 3.10
Copyright(c) 2004-2007 Hangzhou H3C Tech. Co., Ltd. All rights reserved.
S3600-28P-EI S3600-EI-1545
Cluster :
Peer MAC
000f-e239-1333
Table 1-12 Description on the fields of the display ntdp single-device command
Hostname
MAC
Hop
Platform
IP
Version
Cluster
Peer MAC
Peer Port ID
Native Port ID
Speed
Duplex
topology accept
Syntax
topology accept { all [ save-to local-flash ] | mac-address mac-address | member-id member-id |
administrator }
View
Cluster view
Parameters
all: Accepts the current cluster topology as the standard topology.
save-to: Saves the standard topology of the current cluster to the local Flash or the cluster FTP server.
local-flash: Saves the standard topology of the current cluster to the local Flash.
Candidate switch
Peer Port ID
Ethernet1/0/4
Field
Native Port ID
Ethernet1/0/10
System name of a device
MAC address of the device
Number of hops from the device to the topology-collecting
device
Platform information of the device
IP address and mask length of the management VLAN
interface of the device
Version information
Role the device plays in the cluster
MAC address of the peer device
Name of the port on the peer device connecting to the local
device
Name of the port on the local device connecting to the peer
device
Rate of the local port connecting to the peer device
Duplex mode of the local port connecting to the peer device
1-44
Speed Duplex
100 FULL
Description