Key - H3C s3600 series Command Manual

Parameters
hwtacacs-scheme-name: HWTACACS scheme name, a string of 1 to 32 characters.
Description
Use the hwtacacs scheme command to create an HWTACACS scheme and enter its view.
Use the undo hwtacacs scheme command to delete an HWTACACS scheme.
By default, no HWTACACS scheme exists.
If the fabric function is enabled on the switch, you cannot create an HWTACACS scheme because they
are exclusive to each other.
Examples
# Create an HWTACACS scheme named "hwt1" and enter the corresponding HWTACACS scheme
view.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1]

key

Syntax
key { accounting | authentication | authorization } string
undo key { accounting | authentication | authorization }
View
HWTACACS scheme view
Parameters
accounting: Sets a shared key for HWTACACS accounting messages.
authentication: Sets a shared key for HWTACACS authentication messages.
authorization: Sets a shared key for HWTACACS authorization messages.
string: Shared key to be set, a string of up to 16 characters.
Description
Use the key command to configure a shared key for HWTACACS authentication, authorization or
accounting messages.
Use the undo key command to delete such a configuration.
By default, no key is set for HWTACACS messages.
Related commands: display hwtacacs.
1-59