Display Memory Limit - H3C s3600 series Command Manual

Used Rate

display memory limit

Syntax
display memory limit
Mode
Any view
Parameters
None
Description
Use the display memory limit command to display the memory setting and state information of the
switch.
This command displays the current memory limit configuration, free memory, and state information
about connections, such as times of disconnection, times of reconnection, and whether the current
state is normal.
Examples
# Display the current memory setting and state information.
<Sysname> display memory limit
Current memory limit configuration information:
system memory safety: 5 (MBytes)
system memory limit: 4 (MBytes)
auto-establish enabled
Free Memory: 17506496 (Bytes)
The state information about connection:
The times of disconnect: 0
The times of reconnect: 0
The current state: Normal
Table 6-2 Description on the fields of the display memory limit command
Field
system memory safety
system memory limit
auto-establish enabled
Free Memory
The times of disconnect:
Field
Safety value of the switch memory.
Lower limit of the switch memory.
Automatic connection is enabled (If automatic connection is
disabled, auto-establish disabled is displayed).
Size of the current free memory in bytes
Number of disconnections of the routing protocol
Description
Memory occupation rate
Description
6-2