Unknown-Multicast Drop Enable - H3C s3600 series Command Manual

incoming-interface interface-type interface-number: Clears the routing entries that match the
specified incoming interface.
Description
Use the reset multicast routing-table command to clear the routing entries in the multicast core
routing table and remove the corresponding forwarding entries in the MFC forwarding table.
The position of the group-address and source-address arguments are interchangeable. However, they
must be valid addresses; otherwise, the system prompts an error message.
Related commands: reset pim routing-table, reset multicast forwarding-table, display multicast
forwarding-table.
Examples
# Clear the routing entries whose group address is 225.5.4.3 from the multicast core routing table.
<Sysname> reset multicast routing-table 225.5.4.3

unknown-multicast drop enable

Syntax
unknown-multicast drop enable
undo unknown-multicast drop enable
View
System view
Parameters
None
Description
Use the unknown-multicast drop enable command to enable the function of dropping unknown
multicast packets.
Use the undo unknown-multicast drop enable command to disable the function of dropping unknown
multicast packets.
By default, the function of dropping unknown multicast packets is disabled.
Examples
Enable the unknown multicast drop feature.
<Sysname> system-view
System view: return to user view with Ctrl+Z.
[Sysname] unknown-multicast drop enable
1-16