Reset Multicast Routing-Table - H3C s3600 series Command Manual

all: Clears all the forwarding entries or the statistics information of all the forwarding entries. Without this
keyword, the command clears the forwarding entries or the statistics information of the forwarding
entries defined by the following parameters.
group-address: Multicast group address in the range of 224.0.0.0 to 239.255.255.255.
source-address: Multicast source address.
mask: Mask of the multicast group address or multicast source address, 255.255.255.255 by default.
mask-length: Mask length of the multicast group address or multicast source address. For a multicast
group address, this argument is in the range of 4 to 32; for a multicast source address, this argument is
in the range of 0 to 32. The system default is 32 in both cases.
incoming-interface interface-type interface-number: Clears the forwarding entries or corresponding
statistics information of the forwarding entries that match the specified incoming interface.
Description
Use the reset multicast forwarding-table command to clear forwarding entries or the statistics about
forwarding entries.
The positions of the group-address and source-address arguments are interchangeable. However, they
must be valid addresses; otherwise, the system prompts an error message.
Related commands: display multicast forwarding-table.
Examples
# Clear the forwarding entries whose group address is 225.5.4.3 from the multicast forwarding table.
<Sysname> reset multicast forwarding-table 225.5.4.3
# Clear the statistics about the forwarding entries whose group address is 225.5.4.3 from the multicast
forwarding table.
<Sysname> reset multicast forwarding-table statistics 225.5.4.3

reset multicast routing-table

Syntax
reset multicast routing-table { all | { group-address [ mask { mask | mask-length } ] | source-address
[ mask { mask | mask-length } ] | incoming-interface interface-type interface-number } * }
View
User view
Parameters
all: Clears all routing entries from the multicast routing table. Without this keyword, the command clears
the multicast routing entries defined by the following parameters.
group-address: Multicast group address in the range of 224.0.0.0 to 239.255.255.255.
source-address: Multicast source address.
mask: Mask of the multicast group address or multicast source address, 255.255.255.255 by default.
mask-length: Mask length of the multicast group address or multicast source address. For a multicast
group address, this argument is in the range of 4 to 32; for a multicast source address, this argument is
in the range of 0 to 32. The system default is 32 in both cases.
1-15