Ftm Fabric-Vlan; Irf-Fabric Authentication-Mode - H3C s3600 series Command Manual

ftm fabric-vlan

Syntax
ftm fabric-vlan vlan-id
undo ftm fabric-vlan
View
System view
Parameters
vlan-id: ID of the IRF fabric VLAN, in the range of 2 to 4094. The VLAN you specified must be the one
that has not been created manually.
Description
Use the ftm fabric-vlan command to specify the VLAN that the switch uses for IRF fabric.
Use the undo ftm fabric-vlan command to restore the default VLAN.
By default, the number of the IRF Fabric VLAN is 4093.
In an IRF fabric, the VLAN is used to synchronize configurations and transmit IRF data among devices,
avoiding packets being sent to non fabric ports
You need to specify the IRF fabric VLAN before the IRF fabric is established. Because after the fabric is
established, the VLAN cannot be modified.
Examples
# Specify VLAN 2 of the switch as an IRF fabric VLAN.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] ftm fabric-vlan 2

irf-fabric authentication-mode

Syntax
irf-fabric authentication-mode { simple password | md5 key }
undo irf-fabric authentication-mode
View
System view
Parameters
simple: Uses simple authentication mode.
password: Password for fabric authentication, a string of 1 to 16 characters.
md5: Uses MD5 encryption authentication mode.
key: MD5 key, a string of 1 to 16 characters.
1-12