Cluster; Cluster Enable - H3C s3600 series Command Manual

OID:1.3.6.1.4.1.2011.6.7.1.0.3(hgmpMemberStatusChange):member 00.00.00.00.00.12.
a9.90.22.40 role change, NTDPIndex:0.00.00.00.00.00.12.a9.90.22.40, Role:1
[aaa_0.Sysname-cluster]

cluster

Syntax
cluster
View
System view
Parameters
None
Description
Use the cluster command to enter cluster view.
Examples
# Enter cluster view.
<Sysname> system-view
System View: return to User View with Ctrl+Z
[Sysname] cluster
[Sysname-cluster]

cluster enable

Syntax
cluster enable
undo cluster enable
View
System view
Parameters
None
Description
Use the cluster enable command to enable the cluster function.
Use the undo cluster enable command to disable the cluster function.
By default, the cluster function is enabled.
Note that:
To create a cluster on a management device through the build command or the auto-build
command, you must first enable the cluster function by executing the cluster enable command.
1-18