H3C s3600 series Command Manual page 424

mask: Mask of the multicast group address, multicast source address, or RP address, 255.255.255.255
by default.
mask-length: Mask length of the multicast group address, multicast source address, or RP address, in
the range of 0 to 32. The system default is 32.
incoming-interface: Displays multicast routing entries containing the specified incoming interface.
interface-type interface-number: Specifies an interface by its type and number. If you specify null, the
command displays the multicast routing entries without an incoming interface.
dense-mode: Displays PIM-DM multicast routing information.
sparse-mode: Displays PIM-SM multicast routing information.
Description
Use the display pim routing-table command to display information about the PIM multicast routing
table.
The displayed information includes the SPT information and RPF information.
Examples
# Display the information about the PIM multicast routing table.
<Sysname> display pim routing-table
PIM-SM Routing Table
Total 1 (S,G) entry, 1 (*,G) entry, 0 (*,*,RP) entry
(*, 228.0.0.0), RP 23.12.0.1
Protocol 0x20: PIMSM, Flag 0x3: RPT WC
Uptime: 00:00:13, Timeout in 197 sec
Upstream interface: Vlan-interface1, RPF neighbor: 200.1.0.1
Downstream interface list:
Vlan-interface401, Protocol 0x100: RPT, timeout in 197 sec
(196.0.0.3, 228.0.0.0)
Protocol 0x20: PIMSM, Flag 0x4: SPT
Uptime: 00:10:49, Timeout in 196 sec
Upstream interface: Vlan-interface196, RPF neighbor: NULL
Downstream interface list:
Vlan-interface401, Protocol 0x100: SPT, timeout in 197 sec
Matched 1 (S,G) entry, 1 (*,G) entry, 0 (*,*,RP) entry
Table 3-4 display pim routing-table command output description
Field
Total 1 (*, G) entry; 1 (S, G)
entry,0 (*,*,RP) entry
(*, 228.0.0.0)
RP
Protocol
Total number of (S, G), (*, G) and (*, *, RP) entries in the PIM
routing table
A (*, G) entry in the PIM routing table
Rendezvous point
PIM mode (PIM-SM or PIM-DM)
3-7
Description