Vrrp Configuration Commands; Display Vrrp - H3C s3600 series Command Manual

1

VRRP Configuration Commands

Keywords in some commands are modified. See
statistics, vrrp vrid
Keyword verbose is added to the display vrrp command to display the detailed information of the
VRRP group(s). See
The S3600-EI series switches support the VRRP feature, but not the S3600-SI series.
VRRP Configuration Commands

display vrrp

Syntax
display vrrp [ verbose ] [ interface vlan-interface vlan-id [ vrid virtual-router-id ] ]
View
Any view
Parameters
verbose: Displays detailed state information of VRRP.
vlan-interface vlan-id: Displays VRRP state information of the specified VLAN interface. vlan-id is the
VLAN interface ID.
vrid virtual-router-id: Displays state information of the specified VRRP group. virtual-router-id is the
VRRP group ID, in the range 1 to 255.
Description
Use the display vrrp command to display the brief VRRP state information. For details, refer to
1-1.
Use display vrrp verbose command to display the detailed VRRP state information. refer to
for details.
If you do not specify a VLAN interface or a VRRP group, the command will display the state
information of all VRRP groups on the switch.
authentication-mode, and
display vrrp.
1-1
display vrrp, display vrrp
vrrp vrid track interface.
statistics, reset vrrp
Table
Table 1-2