Display Ftm - H3C s3600 series Command Manual

From the above example, you can see the original unit ID of the device with MAC address
000f-cbb7-3264 is 6. After the configuration, this unit ID changes to 4, and the priority of the device
changes to 5.

display ftm

Syntax
display ftm { information | topology-database }
View
Any view
Parameters
information: Displays the FTM module information, including DDP status, unit ID, link status of the
fabric, status of the fabric port, and DDP packet statistics.
topology-database: Displays the topology database information of the fabric.
Description
Use the display ftm command to display the protocol information or the topology database information
of the current fabric.
Examples
# Display the FTM module information of the switch.
<Sysname> display ftm information
FTM State
Unit ID
Fabric Type
Fabric Auth
Fabric Vlan ID
Left Port
Right Port
Advertise
Advertise ACK
Heart Beat
Left Port
Right Port
Units Num Left
Units Num Right : 2
Units Num Backup: 2
: HB STATE
: 2 (FTM-Master)
: Line
: NONE
: 4093
: Disable
: Normal
: Send = 5, Receive = 3
: Send = 0, Receive = 5
: Send = 20, Receive = 0
: Index = 255, IsEdge = 0
: Index = 25, IsEdge = 0
: 1
1-4