Display Msdp Peer-Status - H3C s3600 series Command Manual

Description
Use the display msdp brief command to display the brief information of the MSDP peer state.
Examples
# Display the brief information of the MSDP peer state.
<Sysname> display msdp brief
MSDP Peer Brief Information
Peer's Address
20.20.20.20
Table 4-1 display msdp brief command output description
Field
Peer's Address
State
Up/Down time
AS
SA Count
Reset Count

display msdp peer-status

Syntax
display msdp peer-status [ peer-address ]
View
Any view
Parameters
peer-address: Specified the IP address of an MSDP peer of which the detailed information is to be
displayed. Without this argument, the command displays the detailed information of all MSDP peers.
Description
Use the display msdp peer-status command to display the detailed MSDP peer state information.
Related commands: peer.
Examples
# Display the detailed information of MSDP peer 10.110.11.11.
<Sysname> display msdp peer-status 10.110.11.11
State Up/Down time
Up 00:00:13
Address of the MSDP peer
MSDP peer status:
Up: Session set up; MSDP peer in session
Listen: Session set up; local device as server, in listening state
Connect: Session not set up; local device as client, in connecting
state
Shutdown: Deactivated
Down: Connection failed
Time passed since MSDP peer connection establishment/failure
Number of the AS where the MSDP peer is located. "?" indicates that the
system was unable to obtain the AS number
The number of (S, G) entries cached in the SA
Number of MSDP peer connection reset times
4-2
AS SA Count Reset Count
100 0 0
Description