Shutdown - H3C s3600 series Command Manual

View
VLAN view
Parameters
text: VLAN name, a description of 1 to 32 characters. It can contain special characters and spaces.
Description
Use the name command to assign a name to the current VLAN.
Use the undo name command to restore the default VLAN name.
When 802.1x or MAC address authentication is configured on the switch, a RADIUS server may be
used to deploy VLANs (either named or numbered) on the ports that have passed authentication. If a
named VLAN is deployed, you must use the name command to associate the VLAN name with the
intended VLAN ID. The name of a VLAN must be unique among all VLANs.
By default, the name of a VLAN is its VLAN ID, VLAN 0001 for example.
Examples
# Specify the name of VLAN 2 as test vlan.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] vlan 2
[Sysname-vlan2] name test vlan

shutdown

Syntax
shutdown
undo shutdown
View
VLAN interface view
Parameters
None
Description
Use the shutdown command to administratively shut down the VLAN interface.
Use the undo shutdown command to bring up the VLAN interface.
By default, a VLAN interface is administratively enabled. In this case, the physical state of the VLAN
interface is affected by that of the ports in the VLAN.
When all the Ethernet ports in the VLAN are down, the VLAN interface of the VLAN is down, that is,
disabled.
When one or more Ethernet ports in the VLAN are up, the VLAN interface of the VLAN is up, that is,
enabled.
If you shut down the VLAN interface manually, the administrative state of the VLAN interface will always
be down, regardless of the state of the ports in the VLAN.
1-6