Display Packet-Drop - H3C s3600 series Command Manual

Description
Use the display loopback-detection command to display the loopback detection status on the port. If
loopback detection is enabled, this information will also be displayed: time interval for loopback
detection and the loopback ports.
Examples
# Display the loopback detection status on the port.
<Sysname> display loopback-detection
Port Ethernet1/0/1 loopback-detection is running
system Loopback-detection is running
Detection interval time is 30 seconds
There is no port existing loopback link
Table 1-5 Description on the fields of the display loopback-detection command
Port Ethernet1/0/1 loopback-detection is running
system Loopback-detection is running
Detection interval time is 30 seconds
There is no port existing loopback link

display packet-drop

Syntax
display packet-drop { interface [ interface-type interface-number ] | summary }
View
Any view
Parameters
interface-type: Port type.
interface-number: Port number.
summary: Displays the summary statistics on the packets dropped on all the ports.
Description
Use the display packet-drop command to display the statistics on the packets dropped on a port or all
the ports.
If interface-type interface number is not specified, this command displays the statistics on the
packets dropped on all the ports.
If interface-type interface number is specified, this command displays the statistics on the packets
dropped on the port identified by interface-type interface number.
Related commands: reset packet-drop interface.
Field
1-12
Description
Loopback detection is enabled on the Ethernet
1/0/1.
Loopback detection is enabled globally.
Time interval for loopback detection is 30
seconds.
No loopback port exists.