Enable Log Updown - H3C s3600 series Command Manual

undo duplex
View
Ethernet port view
Parameters
auto: Sets the port to auto-negotiation mode.
full: Sets the port to full duplex mode.
half: Sets the port to half duplex mode.
Description
Use the duplex command to set the duplex mode of the current port.
Use the undo duplex command to restore the default duplex mode, that is, auto-negotiation.
By default, the port is in auto-negotiation mode.
Related commands: speed.
Examples
# Set the Ethernet 1/0/1 port to auto-negotiation mode.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Ethernet 1/0/1
[Sysname-Ethernet1/0/1] duplex auto

enable log updown

Syntax
enable log updown
undo enable log updown
View
Ethernet port view
Parameters
None
Description
Use the enable log updown command to enable Up/Down log information output.
Use the undo log enable updown command to disable Up/Down log information output.
By default, a port is allowed to output Up/Down log information.
Examples
# By default, a port is allowed to output the Up/Down log information. Execute the shutdown command
or the undo shutdown command on Ethernet 1/0/1, and the system outputs Up/Down log information
of Ethernet 1/0/1.
<Sysname> system-view
1-16