Primary Accounting; Primary Authentication - H3C s3600 series Command Manual

System View: return to User View with Ctrl+Z.
[Sysname] radius scheme radius1
New Radius scheme
[Sysname-radius-radius1] nas-ip 10.1.1.1

primary accounting

Syntax
primary accounting ip-address [ port-number ]
undo primary accounting
View
RADIUS scheme view
Parameters
ip-address: IP address of the primary accounting server to be used, in dotted decimal notation.
port-number: UDP port number of the primary accounting server, ranging from 1 to 65535.
Description
Use the primary accounting command to set the IP address and port number of the primary RADIUS
accounting server to be used by the current scheme.
Use the undo primary accounting command to restore the default IP address and port number of the
primary RADIUS accounting server, which are 0.0.0.0 and 1813 respectively.
In the system default RADIUS scheme "system", the default IP address of the primary accounting
server is 127.0.0.1 and the default UDP port number is 1646. In a new RADIUS scheme, the default IP
address of the primary accounting server is 0.0.0.0 and the default UDP port number is 1813.
Related commands: key, radius scheme, state.
Examples
# Set the IP address and UDP port number of the primary accounting server for RADIUS scheme
radius1 to 10.110.1.2 and 1813 respectively.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] radius scheme radius1
New Radius scheme
[Sysname-radius-radius1] primary accounting 10.110.1.2 1813

primary authentication

Syntax
primary authentication ip-address [ port-number ]
undo primary authentication
View
RADIUS scheme view
1-39