H3C s3600 series Command Manual page 436

A static RP functions as a backup for the dynamically elected RP to improve network robustness. When
the RP elected through the BSR mechanism functions, the static RP does not take effect. The same RP
address must be configured on all the devices in the PIM domain.
The new configuration overwrites the existing one if you execute the command for a second time.
Related commands: display pim rp-info.
Examples
# Configure the device that has an interface address of 10.110.0.6 as a static RP that will serve only the
multicast groups in the range of 225.0.0.0 to 225.255.255.255.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] acl number 2000
[Sysname-acl-basic-2000] rule permit source 225.0.0.0 0.255.255.255
[Sysname] multicast routing-enable
[Sysname] pim
[Sysname-pim] static-rp 10.110.0.6 2000
3-19