H3C s3600 series Command Manual page 864

├-(P_0/28)<-->(P_3/0/1)[Sysname:000f-e200-1774]
|
├-(P_0/22)<-->(P_1/0/2)[aaa_5.H3C:000f-e200-5111]
|
├-(P_0/18)<-->(P_3/0/2)[Sysname S3600:000f-e218-d0d0]
|
├-(P_0/14)<-->(P_1/0/2)[Sysname:000f-e200-5601]
|
└-(P_0/4)<-->(P_0/2)[S3600-28P-SI:000f-e200-00cc]
The output information of the display cluster base-topology command is in the following format:
(peer port number)<-->(local port number)[peer device name:peer device MAC address]
For example, (P_0/40)<-->(P_0/6)[Sysname:000f-e200-2200] means that the peer device uses its port
Ethernet 1/0/40 to connect to port Ethernet 1/0/6 of the local device; the peer device name is Sysname;
the MAC address of the peer device is 000f-e200-2200.
display cluster black-list
Syntax
display cluster black-list
View
Any view
Parameters
None
Description
Use the display cluster black-list command to display the information of devices in the current cluster
blacklist.
Related commands: black-list.
Examples
# Display the contents of the current cluster blacklist.
<aaa_0.Sysname> display cluster black-list
Device ID
000f-e200-5502
00e0-fd34-bc66
Table 1-11 Description on the fields of the display cluster black-list command
Field
Device ID
Access Device ID
Access port
Access Device ID
000f-e202-2180
000f-e202-2180
ID of the device in the blacklist, expressed by the MAC address of
the device
ID of the device (in the cluster) that is connected with a device in
the blacklist, expressed by the MAC address of the device
Port (in the cluster) that is connected with a device in the blacklist
1-41
Access port
Ethernet1/0/24
Ethernet1/0/1
Description