Display Vlan - H3C s3600 series Command Manual

Table 1-1 Description on the fields of the display voice vlan status command
Voice Vlan status
Voice Vlan ID
Voice Vlan security mode
Voice Vlan aging time
Current voice vlan enable port mode
The Current voice vlan enable port mode field lists the ports with the voice VLAN function enabled.
Note that not all of them are transmitting packets in the voice VLAN. To view the ports operating in the
voice VLAN currently, use the display vlan command.

display vlan

Syntax
display vlan vlan-id
View
Any view
Parameters
vlan-id: Specifies the ID of the current voice VLAN in the range of 1 to 4094.
Description
Use the display vlan command to display information about the specified VLAN.
For the voice VLAN, this command displays all the ports in the VLAN.
Related commands: voice vlan, voice vlan enable.
Examples
# Display all the ports in the current voice VLAN, assuming that the current voice VLAN is VLAN 6.
<Sysname> display vlan 6
VLAN ID: 6
VLAN Type: static
Route Interface: not configured
Description: VLAN 0006
Name: VLAN 0006
Tagged Ports:
Ethernet1/0/5
Field Description
The status of global voice VLAN function: enabled or
disabled.
The VLAN which is currently enabled with voice VLAN.
The status of voice VLAN security mode: enabled or
disabled.
The voice VLAN aging time
The ports on which the voice VLAN function is enabled.
1-3