Name - H3C s3600 series Command Manual

Parameters
limit: Time limit in minutes, ranging from 1 to 60. The switch will send prompt messages at regular
intervals to users whose remaining online time is less than this limit.
interval: Interval to send prompt messages (in minutes). This argument ranges from 5 to 60 and must be
a multiple of 5.
Description
Use the messenger time enable command to enable the messenger function and set the related
parameters.
Use the messenger time disable command to disable the messenger function.
Use the undo messenger time command to restore the messenger function to its default state.
By default, the messenger function is disabled on the switch.
The purpose of this function is to remind online users of their remaining online time through clients by
message dialog box.
Examples
# Enable the switch to send prompt messages at intervals of 5 minutes to the users in the ISP domain
"system" after their remaining online time is less than 30 minutes.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] domain system
[Sysname-isp-system] messenger time enable 30 5

name

Syntax
name string
undo name
View
VLAN view
Parameters
string: Assigned VLAN name, a string of up to 32 characters.
Description
Use the name command to set a VLAN name, which will be used for VLAN assignment.
Use the undo name command to cancel the VLAN name.
By default, a VLAN uses its VLAN ID (like VLAN 0001) as its assigned VLAN name.
This command is used in conjunction with the dynamic VLAN assignment function. For details about
dynamic VLAN assignment, refer to the vlan-assignment-mode command.
Related commands: vlan-assignment-mode.
1-19