H3C s3600 series Command Manual page 846

Executing this command on a member device will display the following information: cluster name,
member number of the current switch, MAC address and status of the management device, holdtime,
and interval to send handshake packets.
Executing this command on a management device will display the following information: cluster name,
number of the member devices in the cluster, cluster status, holdtime, and interval to send handshake
packets.
Executing this command on a device that does not belong to any cluster will display an error.
Examples
# Display cluster information on a management device.
<aaa_0.Sysname-cluster> display cluster
Cluster name:"aaa"
Role:Administrator
Management-vlan:100
Handshake timer:10 sec
Handshake hold-time:60 sec
IP-Pool:20.1.1.1/24
cluster-mac:0180-c200-000a
No logging host configured
No SNMP host configured
No FTP server configured
No TFTP server configured
3 member(s) in the cluster, and 0 of them down.
# Display cluster information on a member device.
[aaa_2.3600-3] display cluster
Cluster name:"aaa"
Role:Member
Member number:2
Management-vlan:100
cluster-mac:0180-c200-000a
Handshake timer:10 sec
Handshake hold-time:60 sec
Administrator device mac address:000f-e20f-3901
Administrator status:Up
Table 1-5 Description on the fields of the display cluster command
Cluster name
Role
Management-vlan
Field
Name of the cluster, which can be configured through the
build command
Role of this switch
Number of the management VLAN, which can be configured
through the management-vlan command
Description
1-23