Lpar Manager Setting Items - Hitachi Compute Blade 500 Series User Manual

LPAR manager Setting Items

The following table shows LPAR manager setting items required to configure
LPAR manager.
item
Web Console LPAR manager
firmware Bank
Logical
Partitioning
LP IP Address
Subnet Mask
Default
Gateway
VNIC System
No
Time Zone
Management
Path
Authentication
LP CLI IP
Address
Connection
mode
Telnet
authentication
Virtual COM
console port
Password
expiry
B-2
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Table B-1 LPAR manager setting items
Setting items Description
Sets 0 to 3
Sets the LP mode
Sets LP IP Address for communicating
with a management module, SC/BSM,
etc.
Sets VNIC System No
*Sets the value which does not overlap
with all LPAR manager(s) which is
containing Compute Blade Series.
Sets LPAR manager System time zone
Sets the management path
Sets whether to perform user
authentication when performing
connection by using the LP CLI.
Sets a IP address of a server which
installed a HvmSh etc.
Set the connection method of the virtual
COM.
Sets whether to perform user
authentication when connecting to the
guest screen.
Set a TCP port of a virtual COM console. 20801
Set the validity period of a password.
Setting Item List
Support
default
Version
0 01-0X or
later
Depends on a 01-0X
factory-
or later
shipments
state
0.0.0.0 01-0X
or later
255.255. 01-0X
255.255 or later
0.0.0.0 01-0X
or later
0 01-0X
or later
Depends on a 01-0X
factory-
or later
shipments
state
Disabled 02-1X
or later
Disabled 02-05
or later
0.0.0.0 01-0X
or later
Telnet 02-05
or later
Disable 02-05
or later
02-05
or later
0 02-05
or later