Displaying Switch Version And Module Information - Enterasys Vertical Horizon VH-2402S2 Configuration Manual

Displaying Switch Version and Module Information

Use the Switch Information screen to display hardware/firmware version
numbers for the main board and agent module, as well as the power
status and modules plugged into the system.
Use <TAB> or arrow keys to move. <Enter> to select.
Parameter
Main Board
Hardware Version
Firmware Version
Serial Number
Port Number
Internal Power Status
Redundant Power
Status
Expansion Slot 1
Expansion Slot 2.
MainBoard Type
Agent Module
Hardware Version
POST ROM Version
Firmware Version
SNMP Agent
9033820-03
Vertical Horizon Stack Local Management
Switch Information : Unit: 1
Main Board
Hardware Version
Firmware Version
Serial Number
Port Number
Internal Power Status
Redundant Power Status
Expansion Slot 1
Expansion Slot 2
MainBoard Type
Agent Module
Hardware Version
POST ROM Version
Firmware Version
SNMP Agent
<OK>
Figure 2-5. Switch Information
Description
Hardware version of the main board.
System firmware version in ROM.
MAC address associated with the main board.
Number of ports in this unit.
Power status for the switch.
Redundant power status for the switch.
Shows module type if inserted
(100Base-FX, 1000Base-SX, 1000Base-LX, 1000Base-T, or
GBIC).
Shows module type if inserted
(100Base-FX, 1000Base-SX, 1000Base-LX, 1000Base-T,
GBIC, or Stacking).
Indicates if the switch is a VH-2402S2 or VH-2402S.
Hardware version of the agent module.
Power-On Self-Test version number.
Firmware version of the agent module.
Shows if this module is Master or Backup Master.
: V3.0
: V1.49
: 00-00-44-66-88-88
: 24
: Active
: Inactive
: ---------------------
: ---------------------
: VH-2402S2
: V2.0 (850 CPU)
: V1.09
: 02.06.00.28
: Master
<PREV UNIT> <NEXT UNIT>
VH-2402S2 User Interface 13