Clear Netflow Port; Set Netflow Export-Version - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring NetFlow

clear netflow port

Use this command to return a port to the default NetFlow collection state of disabled.
Syntax
clear netflow port port-string
Parameters
port‐string
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to disable NetFlow collection on port ge.1.1:
Matrix(rw)->clear netflow port ge.1.1

set netflow export-version

Use this command to set the NetFlow flow record format used to export data.
Syntax
set netflow export-version {5 | 9}
Parameters
5 | 9
Defaults
None.
Mode
Switch command, Read‐Write.
Usage
Refer to "Version Support" on page 15‐2 for more information about NetFlow version support.
Use the show netflow config command ("show netflow" on page 15‐3) to display the current
NetFlow version.
15-8 NetFlow Configuration
Specifies the port or ports on which to disable NetFlow collection.
Specifies the NetFlow flow record format to use when exporting
NetFlow packets, either Version 5 or 9.
The default is Version 5.
clear netflow port