<value>
Viewing information about collision errors
View information about collision errors to display information about collision errors in the
specified MLT, or for all MLTs.
Procedure steps
1. View information about collision errors by using the following command:
show mlt error collision [<mid>]
Variable definitions
Use the data in the following table to help you use the show mlt error collision
[<mid>]command.
<mid>
Viewing information about Ethernet errors
View information about Ethernet errors to obtain information about the types of Ethernet errors
sent and received by a specified MLT or by all MLTs.
Important:
The IMAC columns refer to internal MAC address errors.
Procedure steps
1. View information about Ethernet errors by using the following command:
show mlt error main [ <mid> ]
Variable definitions
Use the data in the following table to help you use the show mlt error main [ <mid> ]
command.
Configuration — Link Aggregation, MLT, and SMLT
Variable
Variable
MLT and SMLT show commands
Value
Specifies the filename to which the output is
directed.
Value
Specifies the MLT ID
January 2012
109