Configuring System Parameters Using Edm - Avaya 3500 series Getting Started

9. Select a value from the list — true to enable the traffic type, or false to disable the
10. On the toolbar, click Apply.
Rate Limit tab field descriptions
The following table describes the fields on the Rate Limit tab.
Name
Traffic Type
AllowedRatePps
Enable

Configuring system parameters using EDM

Use this procedure to view and modify the system level configuration.
Procedure
1. In the navigation tree, click Edit.
2. In the Edit tree, click Chassis.
3. In the Chassis tree, click Chassis.
4. In the work are, click the System tab.
5. In the sysContact dialog box, type system contact information.
6. In the sysName dialog box, type a system name.
7. In the sysLocation field, type a system location.
Getting Started
traffic type.
Configuring system parameters using EDM
Description
Specifies the traffic type.
Allowed traffic rate packets/second. It is in
the range of 0–262143.
Important:
Rate Limiting feature is disabled when
AllowedRatePps is set to 0.
When Enable is set to True, the TrafficType
can either be multicast, broadcast, or both.
Important:
You cannot set the Enabled field for both
multicast and broadcast TrafficType to
False at the same time. This is an illegal
configuration.
March 2013 99