Enabling Remote Access - Avaya 5900 Series Quick Start Configuration

Variable
<next-hop>
<cost>
enable
disable
weight <cost>

Enabling remote access

You can enable remote access for telnet, SSH (on SSH software images), SNMP, and webpage
access.
For more information, see Using ACLI and EDM on Avaya Ethernet Routing Switch 5900 Series,
NN47211-104 and Configuring Systems on Avaya Ethernet Routing Switch 5900 Series,
NN47211-501.
About this task
Use the following procedure to enable and configure remote access to the management features of
the switch.
Procedure
1. Enter Global Configuration mode:
enable
configure terminal
2. To enable telnet remote access, enter the following command:
telnet-access enable
3. To enable SSH remote access, enter the following command:
ssh
4. To enable SNMP remote access, enter the following command:
snmp-server enable
5. To enable webpage remote access, enter the following command:
web-server enable
October 2015
Definition
Specify the next-hop IP address for the route being
added.
Specify the weight, or cost, of the route being added.
Range is 1 to 65535.
Enable the specified static route.
Disable the specified static route.
Change the weight, or cost, of an existing static
route. Range is 1 to 65535.
Quick Start Configuration for Avaya ERS 5900 Series
Comments on this document? infodev@avaya.com
Enabling remote access
41