Viewing The Startup Configuration; Viewing The Script Execution Log File; Copying Configuration Files - Avaya P580 User Manual

Multiservice switches

Hide thumbs Also See for P580:

Table of Contents

Viewing the Startup Configuration

Document No. 650-100-700, Issue 1

You must have administrator access to view the startup configuration.

To view the startup configuration:

1. In the navigation pane, expand the System > Configuration >

Configuration Files folders.

2. Click Startup Config. The Startup Configuration Web page is

displayed in the content pane.

To view the startup configuration, use the following CLI command:

# show startup-config

Each time the startup.txt file or other script runs, a log file is generated. Log

files contain the data returned from the script. You can view log file data

from the Script Execution Log File using either the Web Agent or the CLI.

To view your Script Execution Log File from the Web Agent, select Script

Log File from the Configuration Management folder in the navigation

pane. The Script Execution Log file displays

To view your Script Execution Log File from the CLI, use the following

CLI command:

# show file_name logfile.txt

You must have administrator access to copy the configuration files.

If you make any changes, you must save the running configuration as the

startup configuration to save the changes. Before you do this, always copy

your startup configuration to a file on the switch or on a TFTP server.

You can save the running configuration to the startup configuration and

copy the startup configuration to a file using either the Web Agent or the

Setting Up the Switch