Rep 7.24 Feeder Front Cover; Rep 7.25 Feeder Right Cover - Xerox Phaser 4600 Service Manual

REP 7.24 Feeder Front Cover

Parts List on PL 7.15 Item 3
Removal
Use safe handling procedures when removing the module. Refer to GP XX. The module
is heavy.
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Separate the option feeder from the printer GP XX.
2. Remove 4 screws and lift to release 2 hooks that secure the Front Cover,
Figure 1 Remove the Front Cover
Revised
Phaser 4600/4620/4622 Printer Service Manual
WARNING
WARNING
Figure

REP 7.25 Feeder Right Cover

Parts List on PL 7.15 Item 7
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
NOTE: Removal of the Right Cover is possible without removing the feeder from the printer.
1. Remove the Tray.
2. Remove 1 screw (plastic) and slide the cover to the rear to release 6 hooks that secure
the cover, Figure 1.
1.
04/2016
4-41
WARNING
Figure 1 Remove the Right Cover
4 Repairs and Adjustments
REP 7.24, REP 7.25