Logging Buffered - Dell PowerConnect 6224 Command Line Interface Manual

ip-address
no logging {
ip-address — IP address of the host to be used as a syslog server.
•
hostname — Hostname of the host to be used as a syslog server. (Range: 1-
•
158 characters)
Default Configuration
No syslog servers defined.
Command Mode
Global Configuration mode
User Guidelines
Up to eight syslog servers can be used.
Example
The following example places the designated server in logging configuration
mode.
console(config)#logging 192.168.15.1

logging buffered

Use the logging buffered command in Global Configuration mode to limit
syslog messages displayed from an internal buffer based on severity. To cancel
the buffer use, use the no form of this command.
Syntax
logging buffered
no logging buffered
level — Limits the message logging to a specified level buffer. (Range:
•
emergency, alert, critical, error, warning, notice, info, debug)
Default Configuration
The default value for
1280
Syslog Commands
hostname
|
level
level
is info.
}