Nortel DMS-100 Series Maintenance Manual page 99

Remote line concentrating module

Hide thumbs Also See for DMS-100 Series:

Table of Contents

For the output or log report to include a node, the node must be in one of the

following states. These states are SysB, CBsy, ISTb, or ManB. The output

or log report can include a node if the node fails, is aborted or does not

complete the last REX test. If a node does not have a REX problem, the

string "ATP" appears in the REX column. This string indicates that every

test passes.

The following output depicts an abbreviated report in response to the NAG

Example of a MAP response:

Front End Load: FSL37AO

Offline Node count:

REX maintenance records

The system generates a maintenance record from a REX test to indicate

results of recent REX tests for each LCM entered. This information is

available at the PM level of the MAP display for a posted LCM.

Note: After a reload restart, the system erases the maintenance record

for each LCM.

DMS-100 Family RLCM Maintenance Manual XPM12 and up

Maintenance overview 1-83

Troubleshooting