Nortel DMS-100 Series Maintenance Manual page 179

13 To determine if the RLCM is equipped with emergency stand-alone (ESA), type
>QUERYPM
and press the Enter key.
Example of a MAP response:
PM Type: LCM
Memory Size: 256K
ESA equipped: Yes, Intraswitching is On
Loadnames:LCMINV XLCM08AX, Unit0:XLCM08AX
,Unit1:XLCM08AX
Node Status: (MACHINE_BUSY, FALSE)
Unit 0 Status: (MACHINE_BUSY, FALSE)
Unit 1 Status: (MACHINE_BUSY, FALSE)
Site Flr RPos Bay_id
TRLC 01 D04
If RLCM is
equipped with ESA
not equipped with ESA
14
To determine if the RLCM is in ESA, check for dial tone at the remote:
A PM alarm appears on the MAP screen. This alarm indicates the RLCM is
in ESA.
The system generates PM106 logs when the PM goes SysB.
The system generates PM110 logs for DS1 link alarms.
A change of state in the PM causes the system to generate the PM128 log.
If the RLCM
has dial tone
does not have dial tone
15 Determine if the RLCM has the ESA timer set for manual recovery from ESA.
To access table OFCENG, type
>TABLE OFCENG
and press the Enter key.
RLCM recovery procedure
Int. No.: 20 Status index: 9
Shf
RLCE 00 04
DMS-100 Family RLCM Maintenance Manual XPM12 and up
Recovery procedures 6-9
Node_No: 165
Description Slot
LCM 40 0
Do
step 14
step 21
Do
step 15
step 21
(continued)
EqPEC
6X04AA