Nortel DMS-100 Series Maintenance Manual page 309

13 To test the RMM, type
>TST
and press the Enter key.
If test
TST PASSED
TST FAILED and the system
produces a card list
TST FAILED and the system
does not produce a card list
14 The card list identifies the cards that can have defects. Replace the cards one
at a time in the order listed. The directions for the order of card replacement
follow:
If all cards on the list
are replaced
are not replaced
15 Perform the Card Replacement Procedures for the next card on the card list.
Complete the card replacement procedures and go to step 13.
16 For additional help, contact the next level of support.
17 This procedure is complete. If the system displays other alarms, perform the
appropriate alarm clearing procedures.
RLCM alarm clearing procedures 7-125
DMS-100 Family RLCM Maintenance Manual XPM12 and up
minor minor
(continued)
Do
step 17
step 14
step 16
Do
step 16
step 15
RMM RMM
(end)