Nortel DMS-100 Series Maintenance Manual page 193

14 To identify the RLCM that has faults and display the LCM by site, type
>DISP STATE SYSB LCM
and press the Enter key.
If response
indicates SysB LCMs are not
present
indicates SysB LCMs are present
15 To post the RLCM with the alarm condition, type
>POST LCM SYSB
and press the Enter key.
DMS-100 Family RLCM Maintenance Manual XPM12 and up
RLCM alarm clearing procedures 7-9
critical
Do
step 37
step 15
RLCM
(continued)